Single sided blank PCB (copper clad board), 10x15cm +/- about 1mm.
Standard 1.5-1.6mm thickness, if you are wanting thinner (lighter) stock check my other listings.
This is phenolic, type PCB aka "bakelite" in China, phenolic is less tough but easier on drill bits, many people prefer to make DIY pcb with phenolic material rather than fibreglass (FR4) for that reason. This type of PCB is often found in home electronics, tv's, stereos etc where a single-sided board is used.
If you know what this is, I don’t have to explain much more!
Great for your home etching trials and tribulations.
May have my finger prints, surface scuff from shipping, mild surface oxidation etc, you of course need to clean any blank board thoroughly when you transfer your artwork, so such surface marks do not affect the usage. I visually inspect each board to ensure there is nothing that would cause a problem (any that have deep scratches or chips go in the dent-n-ding pile).
I also have double sided boards:
283.mytrademe.info
See my Trade Me listings for DIY PCB supplies!
All of our products are shipped from Christchurch, New Zealand using CourierPost for NZ, and Airmail for international.
