Single sided blank PCB (copper clad board), 7cm by 10cm, sold per each. Dimensions +/- 1.5mm.
This is eight-thickness stock (the substrate, the copper is normal thickness afaik), the normal PCB stock is about 1.6mm, this is about 0.2mm thick, give or take.
This is very very thin, about the thickness of a business card. Note due to being very thin some warp is inevitable so not suitable for milling.
Might be useful for your diy drone projects maybe, shaving every gram you can etc...
Reasonably flexible, I think it would probably wrap around a radius of about 4.5-5cm if necessary.
If you know what this is, I don’t have to explain much more!
Great for your home etching trials and tribulations.
May have my finger prints, surface scuff from shipping, mild surface oxidation etc, you of course need to clean any blank board thoroughly when you transfer your artwork, so such surface marks do not affect the usage. I visually inspect each board to ensure there is nothing that would cause a problem (any that have deep scratches or chips go in the dent-n-ding pile).
I also have double sided boards:
283.mytrademe.info
See my Trade Me listings for DIY PCB supplies!
All of our products are shipped from Christchurch, New Zealand using CourierPost for NZ, and Airmail for international.
