This product information has been archived and is not currently planned for restocking.
Please feel free to contact us to discuss this product, we can possibly suggest an alternative or see if it can be sourced specially for you.
Your typical IEC C8 socket.
This is the super cheapo chinese stamped/rolled pin style with solder termination (you must solder wires to the tabs, can not use crimp terminals). 2.5A Maximum.
Better known in NZ as a "figure 8" socket.
If you are making something that needs such a connector, here is such a connector.
Your cut-out will need to be 24-25mm by 12-15mm with minimum 20mm depth behind the panel.
Obligatory Safety Spiel
I sell components from China intended for enthusiasts who are doing personal hobbiest electronic projects. There are no specifications or documentation other than that which is specified above. If you choose to use any of my parts with mains electricity (that is in NZ, 240v AC out of the wall) that is entirely at your own risk, be sure you have the knowledge and skill to assess component suitability, build and test your personal projects to ensure that they are safe.
All of our products are shipped from Christchurch, New Zealand using CourierPost for NZ, and Airmail for international.
