The most common size of 5.5/2.1 (5.5mm outer diameter, 2.1mm inner diameter, 5.5x2.1) plug moulded on a wire with length about 1.5-1.8 meters, and a strain relief on that wire.
Plug tip length 9.5mm, straight.
Unknown specifications of the wire but it's copper and I would say about 20AWG (0.8mm diameter). Pre-stripped ends which are tinned heavily with solder.
White marked wire is the center.
Please note that there are different sizes of plug, if this is the plug size for your particular device I can not say, some plugs are imperceptibly different to the naked eye (eg 5.5/2.1 vs 5.5/2.5) but are not interchangeable, also take careful note of POLARITY when replacing a plug, if you don't know what that means, this is not a job you should be doing!
All of our products are shipped from Christchurch, New Zealand using CourierPost for NZ, and Airmail for international.
