Wire length about 1.5-1.8 meters, and a strain relief on that wire for mounting into your enclosure. You get 5 lengths in each pack.
Some of these have weird sized DC barrel plugs on them, so I'm pushing them out as just wire with a chassis strain relief for basically nothing to get rid of the things.
Just chop off the plug leaving a bit of length and call it a bonus freebie (to fill up your junk parts drawer further).
If nothing else, it's more than 5 meters of reasonable quality PVC twin wire for a couple dollars.
Unknown specifications of the wire but it's copper and I would say about 20AWG (0.8mm diameter).
Chassis end is pre-stripped and tinned, the other end as above might or might not have a plug on it which you can chop off and do what you want with.
One wire has a white stripe, usually you'd use that for positive, but that's your choice.
All of our products are shipped from Christchurch, New Zealand using CourierPost for NZ, and Airmail for international.
